Non Rising Stem Ductile Iron Gate Valve / Mueller Resilient Wedge Gate Valve

Non Rising Stem Ductile Iron Gate Valve / Mueller Resilient Wedge Gate Valve
 
General information
Rubber-coated shut-off wedge with sliding caps to reduce wear and tear and operation torques;
Maintenance free and corrosion resistant stem seal with O ring sealings;
Full passage, without contraction;
Bi-direction flow, tight in both directions;
Flange connection dimensions to EN 1092-2;
Body, cover and wedge made of ductile cast iron GGG40 according to DIN 1693;
Wedge fully vulcanized EPDM rubber;
Operating pressure: DN500 – DN600, PN10/PN16; DN700 – DN1200, PN10;
With self-locking gearbox, open and close limit stops and with position indicator;
Stem made of waste water resistant stainless steel grade 1.4401;
Replaceable stem nut made of zinc-free cast bronze;
Set for underground installation;
 
 
Ductile Iron Gate Valve Specifications :
 

 
 
Ductile Iron Gate Valve APPLICABLE STANDARDS 
 
⊙ American Standard 
Design to ANSI/AWWA C509 
Face to face dimension to ASME B16.10-2000(ISO 3 series) 
Flange and drilling To SME/ANSI B16.42-1998 
⊙ British Standard 
Design to BS5163,BS5150 
Face to face dimension to BS5163(ISO 3series,ISO19 series) 
Flange and drilling To BS4504 part1(EN1092) 
⊙ Germany Standard 
Design to DIN3352 
Face to face dimension to DIN3202(F4:ISO 14 series;F5: ISO 15 series) 
Flange and drilling to BS EN1092