|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Wafer Type Butterfly Valve | Application: | Freshwater |
|---|---|---|---|
| Size: | DN15 ~DN200 | Feature: | Easy To Install And Maintain |
| Standard: | DIN / BS / AWWA / JIS | Temperature: | -20~120 C |
| Body: | Aluminum - Bronze | Disc/wedge: | Aluminum - Bronze |
| High Light: | ductile iron butterfly valve,water butterfly valves |
||
Freshwater Wafer Type Butterfly Valves Easy To Install And Maintain
Wafer Type Butterfly Valve Brief introduction:
The butterfly valve is operated by the disc rotating form 0° to 90°, can be applied to cut off or regulate
the flow of medium.
The valve can be actuator by operating lever, handle wheel electric actuator or pneumatic actuator.
Widely used for potable water supply and distribution, waste water treatment, electric power plant, gas
supply, warm-air system, smelting plant, ship building, textile, petroleum, chemistry, or other light
industries.
Wafer Type Butterfly Valve Features:
⊙ Small operation torque
⊙ Easy to install and maintain
⊙ Flow pattern tend to be straight
⊙ Open-close 90° more smoothly
Wafer Type Butterfly Valve Mail part & material
Main Hand Lever :Aluminum Alloy,
Plastic Auxiliary Hand lever : Aluminum Alloy,
Plastic Spring: Common Spring Stainless Steel Spring
Technical Specification
- Nominal diameter: 50～200(2″～ 8″)
- Nominal pressure: 1.0/1.6/2.0Mpa
- Applicable Temperature: -10℃～150℃
- Drive mode:Aluminum alloy hand lever.
- Applicable medium: freshwater,sea water,food,natural gas,alcoholic,salt,acid,alkali,oil,steam,air etc.
|
Butterfly Valve Specification |
A (mm) |
A 1 (mm) |
H(mm) |
Total Weight (Kg) |
||
|
|
A-type |
LT-type |
|
|
A-type |
LT-type |
|
DN25-32 |
150 |
- |
115 |
180 |
2.0 |
- |
|
DN40 |
160 |
- |
115 |
190 |
2.2 |
- |
|
DN50 |
216 |
248 |
170 |
260 |
2.4 |
3.17 |
|
DN 65 |
223 |
258 |
|
280 |
2.67 |
4.00 |
|
DN 80 |
231 |
265 |
|
304 |
2.87 |
4.97/5.67 |
|
DN100 |
335 |
367 |
200 |
340 |
5.00 |
7.50 |
|
DN125 |
349 |
386 |
260 |
375 |
7.3 |
11.5 |
|
DN150 |
362 |
401 |
|
407 |
8.8 |
12.5 |
Features:
⊙ Professional design
When initiating the rotary opening movement the disc is off-seated after only a few
degree of opening movement and there is very little wear and tear between seat ring and disc.
⊙ Combine fastness
Stainless steel seat ring is rolled into the valve body by applying special rolling technology
when DN<1200. Ultrasonic spray applies seal of valve body when DN>1400.
⊙ Adjust tightness
Rubber sealing ring and disc can adjust tightness or softness of sealing with clamping ring, it insures
best performance of adjusting the compression of sealing.
Mail part & material
Body, Disc: GGG50 with internal and external epoxy resin coating
Stems: 1Cr17Ni12Mo2Ti, Stainless steel min.13%Cr
Bushing :Bronze CuAI10Fe3
Seal ring, O-ring: NBR, EPDM or FPM
Technical Specification
-Nominal diameter: 150～2600mm
-Nominal pressure: 1.0/1.6/2.5Mpa
-Strength testing pressure: 1.5/2.4/3.75Mpa
-Sealing testing pressure: 1.1/1.76/2.75Mpa
Executive standard
|
Design standard |
DIN3354 |
|
Face to face |
DIN3202 or BS 5155 |
|
Flange end |
DIN 2501 |
|
Test & inspection |
DIN 3230 or GB/T 13927 |
|
Working temperature |
NBR<80℃; EPDM<120℃; FPM<160℃ |
Main external and connection dimension
1.0MPa mm
|
DN |
L |
H1 |
H2 |
H3 |
Flange dimensions comply with DIN 2501 |
||||||
|
long type |
short type |
O |
C |
g |
f |
b |
n-d |
||||
|
150 |
210 |
140 |
226 |
165 |
|
285 |
240 |
212 |
3 |
19 |
8-23 |
|
200 |
230 |
152 |
255 |
192 |
|
340 |
295 |
268 |
3 |
20 |
8-23 |
|
250 |
250 |
165 |
293 |
227 |
|
395 |
350 |
320 |
3 |
22 |
12-23 |
|
300 |
270 |
178 |
326 |
260 |
|
445 |
400 |
370 |
4 |
24.5 |
12-23 |
|
350 |
290 |
190 |
368 |
314 |
|
505 |
460 |
430 |
4 |
24.5 |
16-23 |
|
400 |
310 |
216 |
423 |
346 |
634 |
565 |
515 |
482 |
4 |
24.5 |
16-28 |
|
450 |
330 |
222 |
455 |
385 |
666 |
615 |
565 |
532 |
4 |
25.5 |
20-28 |
|
500 |
350 |
229 |
506 |
422 |
728 |
670 |
620 |
585 |
4 |
26.5 |
20-28 |
|
600 |
390 |
267 |
568 |
490 |
790 |
780 |
725 |
685 |
5 |
30 |
20-31 |
|
700 |
430 |
292 |
632 |
550 |
854 |
895 |
840 |
800 |
5 |
32.5 |
24-31 |
|
800 |
470 |
318 |
692 |
615 |
924 |
1015 |
950 |
905 |
5 |
35 |
24-34 |
|
900 |
510 |
330 |
815 |
678 |
1098 |
1115 |
1050 |
1005 |
5 |
37.5 |
28-34 |
|
1000 |
550 |
410 |
880 |
743 |
1163 |
1230 |
1160 |
1110 |
5 |
40 |
28-37 |
|
1200 |
630 |
470 |
1024 |
860 |
1307 |
1455 |
1380 |
1330 |
5 |
45 |
32-40 |
|
1400 |
710 |
530 |
1210 |
1010 |
1350 |
1675 |
1590 |
1535 |
5 |
46 |
36-43 |
|
1600 |
790 |
600 |
1340 |
1140 |
1480 |
1915 |
1820 |
1760 |
5 |
49 |
40-49 |
|
1800 |
870 |
670 |
1460 |
1360 |
1640 |
2115 |
2020 |
1960 |
5 |
52 |
44-49 |
|
2000 |
950 |
760 |
1660 |
1485 |
1800 |
2325 |
2230 |
2170 |
5 |
55 |
48-49 |
1.6MPa mm
|
DN |
L |
H1 |
H2 |
H3 |
Flange dimensions comply with DIN 2501 |
||||||
|
long type |
short type |
O |
C |
g |
f |
b |
n-d |
||||
|
150 |
210 |
140 |
226 |
165 |
|
285 |
240 |
212 |
3 |
19 |
8-23 |
|
200 |
230 |
152 |
255 |
192 |
|
340 |
295 |
268 |
3 |
20 |
12-23 |
|
250 |
250 |
165 |
293 |
227 |
|
405 |
355 |
320 |
3 |
22 |
12-28 |
|
300 |
270 |
178 |
326 |
260 |
|
460 |
410 |
378 |
4 |
24.5 |
12-28 |
|
350 |
290 |
190 |
368 |
314 |
|
520 |
470 |
438 |
4 |
26.5 |
16-28 |
|
400 |
310 |
216 |
423 |
346 |
634 |
580 |
525 |
490 |
4 |
28 |
16-31 |
|
450 |
330 |
222 |
455 |
385 |
666 |
640 |
585 |
550 |
4 |
30 |
20-31 |
|
500 |
350 |
229 |
506 |
422 |
728 |
715 |
650 |
610 |
4 |
31.5 |
20-34 |
|
600 |
390 |
267 |
568 |
490 |
790 |
840 |
770 |
725 |
5 |
36 |
20-37 |
|
700 |
430 |
292 |
632 |
550 |
854 |
910 |
840 |
795 |
5 |
39.5 |
24-37 |
|
800 |
470 |
318 |
692 |
615 |
924 |
1025 |
950 |
900 |
5 |
43 |
24-40 |
|
900 |
510 |
330 |
815 |
678 |
1098 |
1125 |
1050 |
1000 |
5 |
46.5 |
28-40 |
|
1000 |
550 |
410 |
880 |
743 |
1163 |
1255 |
1170 |
1115 |
5 |
50 |
28-43 |
|
1200 |
630 |
470 |
1024 |
860 |
1307 |
1485 |
1390 |
1330 |
5 |
57 |
32-49 |
|
1400 |
710 |
530 |
1210 |
1010 |
1350 |
1685 |
1590 |
1530 |
5 |
60 |
36-49 |
|
1600 |
790 |
600 |
1340 |
1140 |
1480 |
1930 |
1820 |
1750 |
5 |
65 |
40-56 |
2.5MPa mm
|
DN |
L |
H1 |
H2 |
H3 |
Flange dimensions comply with DIN 2501 |
||||||
|
long type |
short type |
O |
C |
g |
f |
b |
n-d |
||||
|
150 |
210 |
140 |
226 |
165 |
|
300 |
250 |
211 |
3 |
20 |
8-28 |
|
200 |
230 |
152 |
255 |
192 |
|
360 |
310 |
274 |
3 |
22 |
12-28 |
|
250 |
250 |
165 |
293 |
227 |
|
425 |
370 |
330 |
3 |
24.5 |
12-31 |
|
300 |
270 |
178 |
326 |
260 |
|
485 |
430 |
390 |
4 |
27.5 |
16-31 |
|
350 |
290 |
190 |
368 |
314 |
|
555 |
490 |
450 |
4 |
30 |
16-34 |
|
400 |
310 |
216 |
423 |
346 |
634 |
620 |
550 |
500 |
4 |
32 |
16-37 |
|
450 |
330 |
222 |
455 |
385 |
666 |
670 |
600 |
560 |
4 |
34.5 |
20-37 |
|
500 |
350 |
229 |
506 |
422 |
728 |
730 |
660 |
610 |
4 |
36.5 |
20-37 |
|
600 |
390 |
267 |
568 |
490 |
790 |
845 |
770 |
720 |
5 |
42 |
20-40 |
|
700 |
430 |
292 |
632 |
550 |
854 |
960 |
875 |
820 |
5 |
46.5 |
24-43 |
|
800 |
470 |
318 |
692 |
615 |
924 |
1085 |
990 |
930 |
5 |
51 |
24-49 |
|
900 |
510 |
330 |
815 |
678 |
1098 |
1185 |
1090 |
1028 |
5 |
55.5 |
28-49 |
|
1000 |
550 |
410 |
880 |
743 |
1163 |
|
|
|
5 |
|
|
|
1200 |
630 |
470 |
1024 |
860 |
1307 |
|
|
|
5 |
|
|
|
1400 |
710 |
530 |
1210 |
1010 |
1350 |
|
|
|
5 |
|
|
|
1600 |
790 |
600 |
1340 |
1140 |
1480 |
|
|
|
5 |
|
|
Contact Person: Mr. Steve
Tel: +8613818096733
Iron coating EPDM or NBR Resilient seated Gate Valve PN16 600mm
Soft Sealing / Rubber Seat And Wedge Resilient Seated Gate Valve Full Bore
Soft Wedge Resilient Seated 10 Inch Gate Valve With SS316 Spindle For Chemical
Light Weight Flange End Resilient Seated Gate Valve DIN F4 / Ductile Iron Gate Valves
Blue WCB / WC6 Cast Steel Gate Valve For Power Station / Butt Weld Gate Valve
Flanged Forged Cast Steel Gate Valve High Temperature , Threaded Gate Valve
2 " SW Socket Welding Cast Steel Gate Valve / Welded Bonnet Gate Valve
1/4'' Perforated Holes Conical Or Basket Type strainer Mounting Between Two Flanges
Cast Steel A216 WCB Y Type Strainer With SS304 Filter , JIS 20K Flange End
Ductile Iron GGG40 Adjustable Water Meter Strainer With Extension Pipe For Wafer
OEM Water Meter Strainer DN50 ~ DN200 , Filter Size 20 / 40 / 60 / 80 Mesh
