Payment & Shipping Terms:
|Size:||DN50 ~ DN300||Pressure:||PN10 / PN16|
|Standard:||DIN F4 / DIN F5 / BS5163A / AWWA C509 C515 MJ / JIS||Temperature:||-20 ~ 120 C|
|Body / Bonnet:||Ductile Iron GGG40 / GGG 50, Cast Iron GG25||Seat:||EPDM / NBR|
resilient seat gate valve,
flanged gate valve
Anti - corrosion Resilient Seated Gate Valve with groove end for water
Grooved-End Gate Valve is widely used in firefighting, building, metallurgy and etc.
Easy to install and service and Low cost
Resilient seat gate valves are employed in the transport of clean water.
The valve gate or closure member is typically in the form of a wedge made of cast iron material
so as to be sufficiently rugged so as to be suitable for high pressure and high flow applications.
In a resilient seat gate valve, the outer surface of the valve wedge is coated with an elastomeric
material so as to offer a bubble-tight seal even at elevated operating pressures.
The valve wedge is operated by turning a threaded stem so as to advance or retract the valve
wedge within the waterway of the valve housing.
Upon valve closure, the resilient material on the edge forms a bubble-tight seal with the internal
surface of the valve body. Dirt or other contamination in the valve operating system can lead to
incomplete sealing of the wedge or other malfunction.
Another object of the present invention is to provide a resilient seat gate valve having an
improved wedge operator system which readily overcomes the deleterious effects of contamination introduced either during construction or entrained within product carried to the valve.
These and other objects of the present invention which will become apparent from studying the
appended description and drawings are provided in a valve arrangement, that comprises a valve
housing that defines a water passageway and a valve seat within the valve passageway.
A valve wedge disposed within the housing passageway moves along a direction of operation
between a closed position in contact with the valve seat to block flow of water through the valve
passageway and an open position allowing flow of water through the valve passageway.
A pair of spaced apart tracks are disposed within the valve housing on either side of the wedge
and extend along the direction of operation. A pair of opposed wings carried on the valve wedge,
travel in each track. A valve stem coupled to the valve wedge moves the valve wedge in opposite reciprocating directions between valve open and valve closed positions.
Rollers are carried on the wings for rolling engagement with the tracks and scraper blades are
carried on the wings adjacent the rollers to scrape contamination from the tracks.
The tracks may be provided with or without a liner. If a wing is provided without rollers because of
a light loading application, for example, the track is preferably provided without a liner.
A light loading condition may arise, for example, at the upper end of a horizontally oriented
valve arrangement. However, under heavy loading conditions as, for example, at the bottom
end of a horizontally operated valve arrangement, it is preferred that the wings be provided
with load bearing rollers.
In this instance, it is also preferred that the track be provided with a liner of generally U-shaped
cross-section and made of a rugged material such as stainless steel.
|2||Wedge||Ductile Iron+ EPDM|
|3||Stem Nut||ZCuAl10Fe3 Gunmetal|
|6||Gland Gasket||ZCuAl10Fe3 Gunmetal|
|10||Hand wheel||Ductile Iron|
|Nominal Pressure : 1.6~2.5MPa|
|DN : 40~300mm|
|Medium : water , oil, gas|
|Work temperature : ≤120℃|
|Design Standard : BS5163|
|Flange Standard : BS EN 1092|
|OTHER STANDARD ARE AVAILABLE UPON REQUEST.|
protective surface finished by shot-blasting and the surface is smooth and neatness.
⊙ Flatting seat
Smooth continuous bore way without seating recess, it is not easy to get impurity pilled up.
Making the liquid straightway.
⊙ Treating with rubber
Both inner and outer are coated with advanced knowledge of rubber vulcanization then making
sure of the elasticity of rubber ,and make sure the exact geometry dimension. Rubber and ductile
cast iron valve hand together hardly. This can avoid fall-off due to long-term use.
⊙ Anti- corrosion
Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of Corrosion resisting and raise the quality
of water supply.
The older ductile iron valve is easy to rupture after being impacted by nonego. It can stop
rupture depend on the good mechanics capability of ductile iron .
⊙ Three “○” sealed ring
With the three “O” – rings, the leakage can be greatly reduced and the “O” – ring can be
replaced under this condition with pressure and without stopping water. The thrust axletree
reduces the frictional resistance and lowers the operational torque. And it can be switch seal
ring without opening and closing.
⊙ Rigid round body
The body is founded minutely, the rigid geometry size ensure inner sealing of valve without
⊙ Light weight
This body is made of ductile iron, it is 20%-30% lighter than the olds. Easily to fixing and
Applications : This valve widely applied in the liquid pipes for opening or closing fixing in such
water, sewage disposal, electric power, energetics pipe , chemical, shipping, energy sources etc.
Contact Person: Mr. Steve