|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | CI/DI Gate Valve | Application: | Oil, Gas, Water, Steam Etc., |
|---|---|---|---|
| Size: | DN15 ~DN800 | Pressure: | PN10 / PN16 / 150lbs |
| Standard: | BS5163 / DIN / AWWA | Temperature: | -29~180 C |
| Body: | Cast Iron / Ductile Iron | Seat: | Brass / Bronze |
| High Light: | oil gate valve,water gate valve |
||
CI/DI Sluice Valves With Hand Wheel,Non Rising Spindle, Clockwise closing, BS5163,PN16,BS4504. Bronze seat.
| Dimension | ||||||
| (mm) | ||||||
| DN(mm) | BS5163 L | D | D1 | b | z-φd | |
| 50 | 178 | 165 | 125 | 16 | 4-18 | |
| 65 | 190 | 185 | 145 | 18 | 4-18 | |
| 80 | 203 | 200 | 160 | 20 | 8-18 | |
| 100 | 229 | 235 | 180 | 20 | 8-18 | |
| 125 | 254 | 270 | 220 | 22 | 8-18 | |
| 150 | 267 | 300 | 250 | 24 | 8-22 | |
| 200 | 292 | 340 | 295 | 24 | 12-22 | |
| 250 | 330 | 395 | 350 | 26 | 12-22 | |
| 300 | 356 | 445 | 400 | 26 | 12-22 | |
| 350 | 381 | 505 | 460 | 26 | 16-22 | |
| 400 | 406 | 565 | 515 | 26 | 16-26 | |
| D= flange outside diameter | ||||||
| D1 = Hole center distance | ||||||
| Material: |
| Operator by hand wheel or square |
| Metal seated gate valve DN40-DN600 |
| Stem: 2Cr13 |
| painting inner and out(change to epoxy coating add 4%) |
| PN16, Cast Iron Body, Brass seat.(10"and bigger size be ductile iron) |
| for 10" and smaller, change to ductile iron add 7% cost) |
| packing: by plywood case suit for sea delivery |
| Non Rising stem |
| LOGO: according as buyer's requirement |
| Dimension | |||||
| Norminal Diam. | length | Dimention of Flange (PN10 / PN16) | |||
| Dia. of flange | Nos. of hole | Dia. of hole | P.C.D. | ||
| DN40 | 165 | 150 / 150 | 4 / 4 | 18 / 18 | 110 / 110 |
| DN50 | 178 | 165 / 165 | 4 / 4 | 18 / 18 | 125 / 125 |
| DN65 | 190 | 185 / 185 | 4 / 4 | 18 / 18 | 145 / 145 |
| DN80 | 203 | 200 / 200 | 8 / 8 | 18 / 18 | 160 / 160 |
| DN100 | 229 | 220 / 220 | 8 / 8 | 18 / 18 | 180 / 180 |
| DN125 | 254 | 250 / 250 | 8 / 8 | 18 / 18 | 210 / 210 |
| DN150 | 267 | 285 / 285 | 8 / 8 | 22 / 22 | 240 / 240 |
| DN200 | 292 | 340 / 340 | 8 / 12 | 22 / 26 | 295 / 295 |
| DN250 | 330 | 395 / 405 | 12 / 12 | 22 / 26 | 350 / 355 |
| DN300 | 356 | 445 / 460 | 12 / 12 | 22 / 26 | 400 / 410 |
| DN350 | 381 | ||||
| DN400 | 406 | ||||
| DN450 | 432 | ||||
| DN500 | 457 | ||||
| DN600 | 508 | ||||
Metal seat gate valve is widely used in water supply, sewage disposal, electric power, chemical, shipping, construction etc.
| Part Material | ||||||||||
| NO. | PART NAME | MATERIAL | ||||||||
| 1 | Body | Ductile Iron | ||||||||
| 2 | Wedge | Ductile Iron | ||||||||
| 3 | Stem Nut | Brass | ||||||||
| 4 | Stem | Stainless Steel | ||||||||
| 5 | Bonnet | Ductile Iron | ||||||||
| 6 | Gasket | EPDM | ||||||||
| 7 | O Ring | EPDM | ||||||||
| 8 | Bonnet Nut | Brass | ||||||||
| 9 | Nut | Carbon Steel | ||||||||
| 10 | Hand wheel | Ductile Iron | ||||||||
| Technical Specification | |||||
| Nominal Pressure:1.0~1.6MPa | |||||
| DN:40~1000mm | |||||
| Medium: water,oil,gas | |||||
| Work temperature: ≤120℃ | |||||
| Design Standard:BS5163 | |||||
| Flange Standard:BS EN 1092 | |||||
| OTHER STANDARD ARE AVAILABLE UPON REQUEST. | |||||
Contact Person: Mr. Steve
Tel: +8613818096733
Iron coating EPDM or NBR Resilient seated Gate Valve PN16 600mm
Soft Sealing / Rubber Seat And Wedge Resilient Seated Gate Valve Full Bore
Soft Wedge Resilient Seated 10 Inch Gate Valve With SS316 Spindle For Chemical
Light Weight Flange End Resilient Seated Gate Valve DIN F4 / Ductile Iron Gate Valves
Blue WCB / WC6 Cast Steel Gate Valve For Power Station / Butt Weld Gate Valve
Flanged Forged Cast Steel Gate Valve High Temperature , Threaded Gate Valve
2 " SW Socket Welding Cast Steel Gate Valve / Welded Bonnet Gate Valve
1/4'' Perforated Holes Conical Or Basket Type strainer Mounting Between Two Flanges
Cast Steel A216 WCB Y Type Strainer With SS304 Filter , JIS 20K Flange End
Ductile Iron GGG40 Adjustable Water Meter Strainer With Extension Pipe For Wafer
OEM Water Meter Strainer DN50 ~ DN200 , Filter Size 20 / 40 / 60 / 80 Mesh
