|
Product Details:
Payment & Shipping Terms:
|
Name: | Resilient Seated Gate Valve | Pressure: | PN10 , PN 16 |
---|---|---|---|
Standard: | DIN F4 / DIN F5 / BS5163A / AWWA C509 C515 MJ / JIS | Temperature: | -20 ~ 120 C |
Body: | Cast Iron GG25, DI | Wedge: | EPDM Rubber |
High Light: | Rubber Resilient Seated Gate Valve,EPDM Resilient Seated Gate Valve,GG25 Resilient Seated Gate Valve |
EN 1074-1 And 2 / EN 1171 Standard EPDM Rubber Resilient Seated Gate Valve
Resilient Seated Gate Valve Design features:
Spindle’s gaskets O-ring - “DRY THREAD” - replaceable under pressure.
Stainless steel spindle with rolled thread and bearing.
Total sufrace rubbered wedge with replaceable spindle nut.
Gate valve with full bore.
All parts are protected against corrosion.
Resilient seated gate valve to EN 1074-1 and 2 / EN 1171, with WRAS approved EPDM
rubber parts.
Body and bonnet of GJS-500-7 (GGG-50). Wedge of ductile iron with fixed wedge nut,
fully vulcanized with EPDM rubber. Stem of stainless steel min. 13% Cr with rolled thread
and wedge stop ring.
Stem sealing with 4 O-rings in a nylon bearing, an EPDM rubber manchette, and a NBR
wiper ring. EPDM bonnet gasket in a groove, countersunk bonnet bolts encircled by the
bonnet gasket and sealed with hot melt. Sockets fitted with "Euro" sealing rings of EPDM
rubber.
Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally.
Resilient Seated Gate Valve Specifications:
NO |
Part name |
Material |
1 |
Body |
Ductile cast iron |
2 |
Wedge |
Ductile cast iron + EPDM |
3 |
Stem nut |
ZCuAl10Fe3 Gunmetal |
4 |
Gasket |
EPDM |
5 |
Bonnet |
Ductile cast iron |
6 |
Gland gasket |
ZCuAl10Fe3 Gunmetal |
7 |
Stem |
2Cr13 S.S.x 20Cr13 |
8 |
Gland |
Ductile cast iron |
9 |
Rubber wiper |
EPDM/NBR |
10 |
Hand wheel |
Ductile cast iron |
Resilient Seated Gate Valve FEATURES
Shot-blasting | protective surface finished by shot-blasting and the surface is smooth and neatness. |
Flatting seat |
Smooth continuous bore way without seating recess, it is not easy to get impurity pilled up. Making the liquid straightway. |
Treating with rubber |
Both inner and outer are coated with advanced knowledge of rubber vulcanization then making sure of the elasticity of rubber ,and make sure the exact geometry dimension. Rubber and ductile cast iron valve hand together hardly. This can avoid fall-off due to long-term use.
|
Three “○” sealed ring |
With the three “O” – rings, the leakage can be greatly reduced and the “O” – ring can be replaced under this condition with pressure and without stopping water. The thrust axletree reduces the frictional resistance and lowers the operational torque. And it can be switch seal ring without opening and closing. |
Rigid round body |
The body is founded minutely, the rigid geometry size ensure inner sealing of valve without any process.
|
Light weight |
This body is made of ductile iron, it is 20%-30% lighter than the olds. Easily to fixing and servicing. |
Applications : This valve widely applied in the liquid pipes for opening or closing fixing in such
water, sewage disposal, electric power, energetics pipe , chemical, shipping, energy sources etc.
Resilient Seated Gate Valve APPLICABLE STANDARDS
⊙ American Standard
Design to ANSI/AWWA C509
Face to face dimension to ASME B16.10-2000(ISO 3 series)
Flange and drilling To SME/ANSI B16.42-1998
⊙ British Standard
Design to BS5163,BS5150
Face to face dimension to BS5163(ISO 3series,ISO19 series)
Flange and drilling To BS4504 part1(EN1092)
⊙ Germany Standard
Design to DIN3352
Face to face dimension to DIN3202(F4:ISO 14 series;F5: ISO 15 series)
Flange and drilling to BS EN1092
Contact Person: Mr. Steve
Tel: +8613818096733
Iron coating EPDM or NBR Resilient seated Gate Valve PN16 600mm
Soft Sealing / Rubber Seat And Wedge Resilient Seated Gate Valve Full Bore
Soft Wedge Resilient Seated 10 Inch Gate Valve With SS316 Spindle For Chemical
Light Weight Flange End Resilient Seated Gate Valve DIN F4 / Ductile Iron Gate Valves
Blue WCB / WC6 Cast Steel Gate Valve For Power Station / Butt Weld Gate Valve
Flanged Forged Cast Steel Gate Valve High Temperature , Threaded Gate Valve
2 " SW Socket Welding Cast Steel Gate Valve / Welded Bonnet Gate Valve
1/4'' Perforated Holes Conical Or Basket Type strainer Mounting Between Two Flanges
Cast Steel A216 WCB Y Type Strainer With SS304 Filter , JIS 20K Flange End
Ductile Iron GGG40 Adjustable Water Meter Strainer With Extension Pipe For Wafer
OEM Water Meter Strainer DN50 ~ DN200 , Filter Size 20 / 40 / 60 / 80 Mesh