High Pressure Floating Ball Check Valve / Stainless Steel Ball Float Valve

High Pressure Floating Ball Check Valve / Stainless Steel Ball Float Valve

Floating Ball Check Valve Technical Specifications

Floating Ball Check Valve Description:

The fully-weled ball valve adopts forged material , welded body, instead of bolts and nuts,to aviod any potential leakage from body.

The forged body with regular structure and even thickness can avoid shrinkage cavities, pin holes, cracks, sand holes and other defects occurring to casted valves.

Technical Specifications

Application:

Long distance pipe lines for petroleum, chemical industry, metallurgy, light industry, power station,

urban construction water supply, as well as oil, gas and natural gas transmission and so on

Body Material               : ASTM A216 WCB

Ball and Trim Material : Stainless Steel

Lever Material              : Forged steel with Zn coated

Seat Material                 : PTFE

Working Temperature   : 05°C to 50°C

Working Pressure          : 150 Psig./350 Psig.

Fluid to be handled        : Natural Gas

(Odorized) containing 0.5% CO2 by volume.   

API 6D Certificate

Technical Specification

- Nominal diameter: 1/2”-25”

- Applicable Temperature: -29℃～425℃(steel) -40℃～550℃(stainless steel)

- Nominal pressure: 150lbs, 300lbs, 600Lb,900lbs,1500lbs PN16/25/40/64/100/160, JIS 5K /10K/20K

- Applicable Medium: water ,gas,oil,and other causticity medium.

Applications Standard

- Manufacture standard : API 608/ DIN/ BS/JIS

- Face to face dimension: ANSI B 16.10,API 6D/ DIN/ BS/JIS

- Flange dimension: ANSI B 16.5 MSS-SP-44/ DIN/ BS/JIS

- Test: API 598 API 6D/ DIN/ BS/JIS

Description:

The ball valve is designed and manufactured according well to API 608. Floating ball when small caliber, 

and fixed ball when large caliber. 

It has fire protection structure and antistatic device. Widely used for petroleum, chemistry, water 

treatment industries.

Features: 

- Anti-blowout Structure of Valve Stem

When medium pass through the valve, the pressure in valve body may possibly push the stem out, or

 when the valve is in repair, if there is pressure in the middle cavity, the stem or medium seems to easily 

fly out upon disassembling the valve, which can cause injures to human beings, To prevent the 

possibilities, a dummy club is packing and thrust bearing are burnt or packing is damaged due to other 

causes, the pressure of medium in valve body will make the dummy club of valve stem in close contact 

with the upper seal face of valve body. Thus to prevent medium leaking out from the damage packing

 position.

- Reliable Seal Structure

The seat is made of PTFE. Because the contact area between seat and the ball will becomes more high

 with rising of pressure of the middle cavity, Small Resistance ball valve has the smallest resistance of all

 the valve, in the case of reduced bore, the resistance is little still.

-Prompt switch

The ball valve circumrotates in 90°,It work quickly to open or close.